Different projects require different tools and methods, and this includes any welding project you might have. Welding has different types, and it is important to choose the right one if you want to get the results you envision.
Among these types, MIG and TIG welding are the ones that people get confused with the most. Aside from the nearly identical names, anyone with an untrained eye will think that their process is also the same. In reality, there are notable differences between the two and this is what you must understand before choosing one over the other in your projects, such as those involving aluminum.
If you are confused about MIG vs. TIG welding, don’t worry because you are not alone. Clearing this confusion is our goal, so stick around if you want to know more about it.
Differences Between MIG and TIG Welding
Because both MIG and TIG welding involves the use of an electric arc to heat and melt the metals and weld them together using filler material, many use them interchangeably. They believe that there are no noticeable differences between MIG and TIG welding anyway, that is why they go for the one that is most convenient or economical for them.
Admittedly, it is easy to confuse them with each other. Aside from the method we mentioned above, they also both require the use of a bare electrode, as well as a shielding gas that prevents the metals from being contaminated or undergo oxidation. Also, both MIG and TIG welding can only be used on metals that are conductive in nature.
But these are where their similarities end. The most noteworthy differences between MIG and TIG welding are in terms of the following:
The easiest way to differentiate the two is through their operation. When they both use a filler material, they vary in how it is done.
Using a consumable wire-fed electrode in welding is what mainly differentiates MIG welding from TIG welding. This wire electrode is directly fed into the spool gun used for welding, allowing one-handed operation.
On the other hand, TIG welding, also known as GTAW, requires a two-handed operation because the tungsten electrode used is non-consumable. In order to meld two metals together, there must be a filler applied. In this case, it is a separate TIG filler rod; one hand operates the torch with the electrode and the other hand holds the TIG filler rod.
Note that it is also possible to weld metals without any filler with TIG welding.
With the differences in operation or handling present, this resulted in a varying degree of difficulty. Since the filler material is directly fed into the spool gun, most welders find it easier to do MIG welding. When used with a filler rod, TIG welding requires a two-handed operation where the torch is simultaneously used with the filler material, and this may be too complicated for beginners.
MIG welding is also called as welding’s “hot glue gun” and this means it is easier to learn than TIG welding; like a glue gun, you only need to press the trigger to start and stop welding.
While both MIG and TIG welding require the use of a shielding gas source and welding power supply, they require different equipment. MIG welding involves using a spool or welding gun and a feed wire unit, while TIG welding involves the use of a welding torch, non-consumable electrode, foot pedal connected to the electrical supply, and separate filler material in the form of a rod if needed.
Filler and Filler Replacement
Both MIG and TIG welding typically make use of a filler, but these fillers and filler replacement vary. Fillers in TIG welding consist of a rod measuring 60-180mm with a diameter of 1 to 3 mm, while the filler in MIG welding is in the form of a lengthy wire that has a 0.5 to 2 mm diameter and is wound in a wire-pool. Because the filler rod in TIG welding is shorter compared to the longer wire used in MIG welding, it will require more frequent replacements.
Because of its uncomplicated operation, MIG has the advantage when speed is an important factor in your project. This is ideal if productivity matters more than quality. On the other hand, the slower TIG welding may be a better option if quality and attention to detail are important.
Thickness of Material
Aluminum and steel, both mild and stainless, are suitable for both MIG and TIG welding. Their difference lies in the thickness of the material. If you are welding thicker ones, MIG welding is recommended because it can do so faster. On the other hand, TIG welding is more suitable for thinner materials.
Project Size and Type
In terms of the type and size of the project, TIG welding is suitable for small-scale ones that involve thinner materials. But for larger projects, such as in the industrial setting, where it involves thicker materials, MIG welding is ideal.
If the quality or appearance of the weld is crucial for you, TIG welding is the best choice. Its finish is a lot cleaner than MIG weld, offering a smooth finish that is free of defects while ensuring a reliable joint is made.
The overall cost is higher with TIG welding, not just because of the materials and equipment required but also because it is more time-consuming. In contrast, MIG welding has cheaper and easily replaceable parts and is more cost-effective because you finish projects much faster.
MIG welding is considered as more diverse because it can easily be used in different applications. On the other hand, TIG welding can also be done on a wide variety of projects, but its overall costs make it impractical to do so. That is why it is typically only used in artwork, automotive, ornamental design, and stainless steel applications.
Knowing these marked differences between MIG and TIG welding will allow you to easily choose which one is more appropriate for your project.
Which Type of Welding is Best?
Now that you are aware of their major differences, you may be wondering which type of welding is considered as the best between MIG and TIG welding. By now, you know that there is no straight answer for that.
MIG welding is your best option if:
- You require high strength welds that require only minimal cleaning and sanding
- Speed and accuracy are essential
- Welding will be done indoors, as the shielding gases used are not ideal for outdoor use
- You require only minimal fumes, especially for continuous operations
- The metals to be welded are thick, but it can also be used on thinner metals. When welding thin metals, care is crucial to avoid burning through it
- Your project involves heavy-duty work and longer operations, allowing you to weld more pieces in a short time
- Minimal defects are important, as its continuous operation lessens starts and stops
- One-handed operation is a must
On the other hand, go for TIG welding if:
- You need weld beads that are aesthetically-pleasing and offer a beautiful finish
- Attention to detail is required
- You require your work to be spatter-free, resulting in a cleaner finish
- The work area is extremely clean
- You will only work on a small project
- Environmental hazards are a concern, as TIG welding is considered more eco-friendly because of the minimal fumes and sparks it generates
- It does not involve cast iron
- You need more control over your weld
- Spatter-free work is your goal
- Stronger welds are needed
- Less maintenance is needed, as TIG welding does not require sanding and cleaning in-between jobs
For general use, MIG welding is recommended because of its easy operation and versatility. TIG welding is more appropriate for the more experienced welders and those that require neater welds.
Which Welder is Best for Aluminum?
If you are working on aluminum, you need to know which welder is best for it. If it is your first attempt to weld aluminum, you may think that any type will work; in reality, this is not the case. Unlike other steel alloys, aluminum is harder to work with due to its high conductivity and low melting point. The oxide film present on the aluminum surface, as well as its alloys, has a higher melting point than aluminum itself and makes it tricky to work with even for experienced welders.
Not only that, there are also certain types of aluminum alloys that require specific filler materials before they can be properly welded. Also, the processes done pre-weld and post-weld vary because of the oxide film present.
All these factors make it impossible to use a single type of weld for aluminum and all its alloys. That is why like other metals, the best welder for aluminum will depend on its purpose.
In most cases, TIG welding is used when aluminum is involved. This is primarily due to the fact that a welder has more control with this method, which is crucial to prevent the aluminum from overheating. Since a filler rod is used, you can easily use a filler that has similar properties with the aluminum alloys you are working on. This allows a cleaner weld on the aluminum and prevents feedability issues that sometimes occur with wire feeding.
TIG welders suitable for aluminum typically have the following characteristics:
- AC-Powered – it is more suitable when dealing with the oxide film on the aluminum surface
- Output Power (in Amperes) – the ideal range is 5 to 230 amperes
- Welding Featuring a Low Amperage – its arc stability must not exceed 10 amperes
- Duty Cycle – should ideally be 50 to 80 percent, but it can differ depending on what you need because different manufacturers have found workarounds involving this aspect
- Pulse Welding – having a pulse mode offers better control in terms of heat
You can also use MIG welding, but it is a bit more complicated to do so. While there are different types of MIG welding, only pulse welding and spray arc welding can be used for aluminum. Like in TIG welding, the filler material to be used should also be similar to the alloy being welded. While the shielding gas may vary depending on the alloy, 100% argon is generally recommended. Also, this is preferably done with thin aluminum sheets only due to the amount of heat required.
To be applicable to aluminum, MIG welders should have the following features:
- Gas supply – it should be pure argon; the welder must not have a gasless flux core
- Design – a spool gun that allows the use of a coil with wire or one that has a short Teflon liner and wire feeding system with a smooth roller that is U-shaped
- Duty Cycle – will depend on your environment; this is crucial especially if the workspace is hot
- Protection from Overheating – MIG welders are at risk of overheating when used with aluminum, that is why safeguards should be in place
From all these, it is safe to say that TIG welding is best used with aluminum, but the major issue lies in its operation. Since handling TIG welders require skill and experience, only trained users can work with it. If you are not yet familiar with TIG welding, you should use MIG welding for your work involving aluminum.
What is important is that you avoid welding methods that require the use of a flux, as it will likely result in weld porosity.
What Do You Use a TIG Welder For?
Despite MIG welding seen as more versatile, it does not mean that TIG welding is limited. In fact, a TIG welder can be used in a variety of materials and for various purposes.
In particular, this is used with different materials and on projects where precision and control are required. These include:
- Small, precise welds
- Critical weld joints
- Making different kinds of joints, such as butt joint, T-joint, fillet weld, and lap joint
- Welding non-ferrous metals, including magnesium, copper, and aluminum alloys, and stainless steel but for thin sections only
- Tubings with small diameters and thin walls, such as those used for bicycles
- Welding conventional metals like copper and nickel alloys, gold, titanium, brass, and cobalt
- Making repairs
- Arts and crafts, such as sculpture-making
- Welding considered tricky, such as welding on round objects and making s-curves
What Do You Use a MIG Welder For?
Compared to a TIG welder, there are more uses for a MIG welder because of the easy handling it offers. Among the many materials and applications you can use it for are:
- Various metals and alloys, such as stainless steel, silicon bronze, carbon steel, nickel, aluminum, copper, and nickel
- Joining thin to medium thick materials
- Creating different joints, including T-joint, butt weld, and lap joint
- Welding in various positions
- Home and industrial welds
- Doing repairs
- Pipe welding
- Equipment rebuilding
- As overlay of coating that is wear-resistant
- Surface reinforcements, such as train tracks that are worn-out
Now that you are aware of the basics of MIG versus TIG welding, hasn’t it become easier for you to choose which one to use for your next welding project?