Best garage floor epoxy, paint, and polyurethane coating kits

The garage floor is perhaps the last thing on your list when it comes to home improvement. However, there are important reasons why you should prioritize putting or replacing the floor coating. Some of these are reducing the floor cracks and helping remove the hard stains. I will explain more below.

If you are considering enhancing your garage, there are things that you need to know. You want to know the best garage floor epoxy and paint. You can also use a polyurea coating. Do you know the differences? And that is what this post is all about.


First, we will go into in-depth details about looking for the perfect layer for your garage and why you should pick one after another.

Understanding garage floor protection

Man protecting flooring

Many homeowners prefer plain and concrete garage floors for practical reasons. And one of those is that concrete foundations are low maintenance. But it could only offer a few limited edges concerning flooring protection.

Without a question, the quickest and most straightforward way to protect the garage floor is to use materials stuffed over it. It includes floor mats and tiles. Unfortunately, these overlays are the most commonly used by practical homeowners. That is because you can easily remove or replace them at any time. Yet, they are not as durable and functional as a coating.

A coating is an excellent choice if you apply a rigid, permanent protective layer over the existing substrate. Protective and decorative paint is a great alternative. It’s the super-effective polyurea protective options that are even readily available. These cured end products will revitalize the floor while shielding it from harsh elements and spills.

You may want to know the answer to these questions as we proceed:

  • Why do I need to protect the surface?
  • What benefits can I expect from using some of these products?
  • Is it necessary to paint my garage’s surface?
  • How much is the overall cost?
  • Can I do it instead of hiring a person to do it?

Make sure to read our guide on extension cords and engine welders.

Should I coat?


A plain solid concrete surface can constitute a typical garage facility. Indeed, many car owners are complacent with the concept as long as there is a safe place for cars.

The unfortunate truth is that bare concrete flooring will depreciate its quality in no time relative to other concreting alternatives. And due to various elemental factors that could make a possible mess around your garage flooring.

In addition to car and foot traffic, the garage is prone to dirt and hot tires. In addition, engine grease and road salt are all factors taking a toll on the floor. And as the climate changes suddenly, the moisture carries in from outside. It includes rain and snow, which puts tension on the surface. And that is a lot for the surface to handle.

One of the most significant factors affecting any form of concrete surface is deterioration. Substantial deterioration occurs due to physical and chemical reactions, especially in unprotected concrete.

Common causes for concrete deterioration:

  1. Concrete scaling. It’s flaking or peeling of concrete due to freeze-thaw cycles.
  2. Substantial disintegration is the same as scaling. It escalates over removing ice deposits in the event of the frost effect.
  3. Sand and gravel. Particles of active water-borne sand and gravel that are scrubbing against will damage the surface. That is commonly known as erosion.
  4. Corrosion of steel reinforcement. The presence of chloride ions from the steel reinforcement is the primary cause of premature corrosion.
  5. Chemicals. Accumulated expansion of chemicals caused by the reaction of alkali hydroxides in concrete can cause cracking over time.
  6. Concrete delamination. When the paste layer of the concrete separates from the slab body, which tends the concrete weakens and becomes unbonded.
  7. Plastic shrinkage. It is when the concrete is still in its plastic state, with damp particles. Well, this means the slab will crack in no time.
  8. Spalling

Though these factors might not occur right there and then, they may develop in ways you may not anticipate. That is the time coating comes into play.

How would you love a surface with an extra protective layer, such as topcoats? It can tolerate severe surface wear, like complex elements or oil spillage. It provides great protection against corrosion. Apart from being aesthetically pleasing, it also offers excellent protection.

A sealed garage floor

What to look for to provide the proper protection?

These are the significant benefits to look for if you apply a coating in your garage:

  1. The coated floor will make a room seem brighter and more elegant, mainly by using light colors.
  2. It increases its commercial value, particularly if you want to attract more clients.
  3. It pprotects concrete defects and cracks.
  4. It makes the space seem more organized and tidy.
  5. They are effortless to keep up and clean.
  6. They are highly resistant to high impact and surface scratches.

What is the best option?

When keeping up garage flooring, you must at the very least find the best solution. The most significant factor to remember is opting for treatments with long-lasting safety. It should provide additional longevity while still offering a flawless appearance.

Garage floor paint is a reasonable option when searching for the most cost-effective treatment to withstand mild cracks and stains. Epoxy is a safer choice if your garage needs more heavy-duty and durable protection against high impacts and abrasions. Furthermore, a coating is more efficient with significantly strong epoxy material. A Polyurea coating is a more durable material than epoxy.

These are the products we’ll look at in this article
Concrete paintRust-oleum epoxy shield

Protective epoxy

Epoxy coating is by far the most cost-effective solution. It typically lasts 2 to 3 years, depending on the foot traffic. With good treatment and upkeep, it can last for longer.

Every day, your garage will be exposed to heated tires and dripping engine oil. Dust stains and other wear take a serious toll. Hence, this strong layer of protection atop the concrete is essential.

They are oil-resistant and easy to maintain. Extensive footmarks won’t easily wear it out. When floors shine, they reflect light. It brightens the room due to its reflective display.

How does epoxy work? It hardens during chemical reactions between a substrate and a hardener, resulting in a solid epoxide adhesive. It is strong enough to withstand the most challenging, high-use environments. Examples include a garage. With an extremely limited odor, epoxy is also ideal for indoor surfaces.

Concrete paint

Please don’t mix up the epoxy and floor paint. Although both use rollers and brushes, it doesn’t mean they are alike. Epoxy and paint vary in terms of chemical composition and efficiency.

Concrete paint is the answer to your garage makeover to protect your cement surface against minor stains and rust.

In reality, even the most pristine concrete surface will become a massive mess after a few years. It’s due to oil drips and hot tires. Dirt and specs of dust simply have a certain effect. Garages usually take a lot of exhaustion. It is the only realistic explanation that paint is good for revamping every garage.

Concrete paints may be latex or oil-based, with satin or non-slip finishes to ensure durability under various caustic conditions.

The best idea is to use the paints designed for use on concrete surfaces when refinishing them. These products will outperform regular paints in any concrete applications. However, it is known to be a short-term enhancement solution. The scratches and flakes quickly over time may need to be renewed or fully re-applied earlier than anticipated. As a result, some consumers opted to apply multiple coats rather than twice if necessary.

Curious about our gauge wire guides? We have just the guide you need!


Polyurea is a high-end professional product. This coating is initially intended for general-purpose use and formulated to perform well in anticorrosion and waterproofing applications. It’s great for steel and concrete structures, including floors.

two cans of polyurethane

Polyurea is a much more brilliant option nowadays. They are 20 times more rigid than epoxy. Furthermore, the material is resistant to moisture diffusion. When used with a proper Polyurea primer, Polyurea provides excellent adhesion to most substrates. A high-quality acrylic latex house paint performs well over coated Polyurea.

Overall performance of Polyurea:

  • It offers excellent corrosion protection.
  • It’s impact and abrasion-resistant.
  • It has resistance to acids and alkalis.

Remarkable Flexibility:

  • Fast reactivation and cure time
  • It’s suitable under the temperature from minus 30 degrees C to plus 120 degrees C.
  • It retains physical properties from -30*C to +120*C.
  • Excellent elongation properties


  • 100% solid with zero VOC
  • Seamless and tough

This supports that Polyurea has an exceptional advantage over any other option.

Rust-oleum epoxy shield

It usually becomes smoother than bare concrete when you protect your floor and can become slippery when wet. In this event, adding a Rust-oleum is the perfect solution to create a non-slip surface.

You can apply Rust-oleum Anti-skid Additive to the composite before application or by top layer with an epoxy shield. This procedure will scintillate your showroom floor.

This type will protect the surface against motor oil and hot tires. Cracks and frost won’t be able to damage your space.

Its special features:

  • High-gloss finished
  • It’s five times stronger than 1 part epoxy.
  • Durable protection
  • It’s low odor and VOC, making it owner-friendly.
  • Easy mixing and application
  • It includes decorative color chips.
  • It’s walk-on ready 24 hours and drive-on in 3 days.
  • Superior adhesive
  • No hot tire pick up
  • Easy to clean surface soap and water
can of polyurethane

Can I apply Epoxy myself?

If you think it is difficult to do the work yourself, I’d say no. And you can do so even without the assistance of a professional. All you need is a little more creativity and diligence. After that, it’s as straightforward as taking these simple steps.

Easy DIY steps to apply it yourself:

Step 1: Protect the wall with painting protection covering film. A taped plastic may do.

Step 2: Clean the surface with a cleaner or degreaser. Apply a cleaning solution and clean the floor with a bristle broom.

Step 3: Hose down the floor for rinsing.

Step 4: Start applying the epoxy and using a paintbrush to cut in the edge section. And a roller paint to apply in 4 x 4 areas.

Step 5: Add decorative chips or colored flakes if desired.

Step 6: Apply a clear coat for refinement.

It needs an even and completely clean surface to bond well. Some dirt or grease will weaken the adhesion, so proper cleaning is essential before application. Be sure to clean the surface by using the appropriate cleaning tools thoroughly.

Be sure to choose a day where the concrete is not wet, preferably when the temperature is between 50 and 80 degrees celsius. The tricky part is that if the epoxy and hardener are blended in, you only have two hours to work on the mixture. After that, the blend hardens and becomes sticky.

Epoxy usually dries within 12 to 24 hours. Before you paint it, strategize which surface to coat first and successfully move to the next. Until then, be sure not to let anyone in or park your car inside.

How much does it cost to epoxy?

Epoxy is one of the most cost-effective garage floor resurfacing materials.

The cost of epoxy floors varies based on the form of epoxy used and the additional preparation materials required. The total size of the area to be covered will also influence the cost. It costs between $3 and $7 per square foot, including labor and other expenses. With that said, you can estimate the cost by the actual size and the state of the substrate.

A surface with fewer cracks and damage than the brand new ones will be cheaper. It does not demand many adjustments and extra preparations, so it does not cut into your budget.

Final thoughts:

Floor sealant being applied

It is worth knowing that the garage floor and protection should work accordingly.

Garage flooring is becoming more widely accepted as a home component that requires consideration and maintenance. The garage is as essential as your deck and or lawn.

Within the garage, it is necessary to prioritize improving the flooring too. Garages are exposed to all the wear, from footmarks to tires and many other objects. It is wise to choose the best option for your specific needs.

In conclusion, should you need to coat your floor? Definitely a yes. They will reduce or remove all possibilities that the concrete will deteriorate. Replacing your garage floor is even more costly in the long run.

The best choice is picking your options from epoxy, paint, and Polyurea. Each of them has different features that will surely enhance your floor. Adding a layer of one of these products mentioned here will make it flat and smooth. Some options contain anti-slip additives, while others comprise decorative flakes that make the surface appealing.

Transform the look of your home with these high-quality options. Choose the paint or Polyurea that works for you. And soon, you will have a space that you can be so proud to show to your family and friends.


Which epoxy garage floor is best?

Currently topping the charts is the Rust-Oleum Rock Solid Epoxy. Just like the name suggests, it’s durable and can defend your garage floor from all types of materials and chemicals. This includes oil, water, gas, and other chemicals. It’s also cheaper than others which makes it a popular choice.

Is it worth putting epoxy on the garage floor?

Maybe you’ve got a garage that is looking forward to some great big spills and leaks thanks to major liquid activity. It is worth it. Putting epoxy on your floors will protect the floor and your pocket from major cleaning and maintenance costs in the future.

Which epoxy company is best?

Hexion and Olin are both American companies that are the age-old experts in the epoxy game. Hexion specializes in its nifty R & D and its implementation to enhance customer experience. Olin has a superb portfolio of various epoxy to tailor to every need.

Why should you not epoxy your garage floor?

There are plenty of reasons to stick to epoxy for garage floors. Some might choose to go without it or choose Polyurethane in its place. Polyurea is certainly more durable and long-lasting than epoxy. Epoxy can fade over time as its validity is only 2-3 years. You will also need a 5-day interval to let the epoxy fully cure and settle before you can use it.

Here’s what you need to install the epoxy yourself instead of calling the professionals.

How to install garage floor epoxy?

  1. Get the surface ready.

    You’ll need a scraper or a shovel to remove the floors’ dust or other debris. Get the floor completely clean by using a broom or vacuum to pick up the debris. Next, use a brush to scrub out the oil stains and other marks. Use a wet-dry vacuum to wash the whole floor.

  2. Make the acid etching mixture.

    Wear a vapor respirator to protect yourself from the fumes of chemicals. Measure out 1 parts acid with 10 parts water according to the amount you need. The acid will be 32% muriatic acid. Mix the solution using a paint stirrer.

  3. Spread the mixture.

    Take this mixture and spread it evenly across the floor using a sprinkling mechanism. Use a long-handled brush to etch the entire floor.

  4. Get the epoxy coating ready.

    Using a drill machine with a stirring bit, you can mix the epoxy solution. Make sure they are mixed well and mix a second time if necessary.

  5. Start with the borders.

    Get tape on the edges under the doors and other entry points. Now start applying a 4-inch thick coat of epoxy on the borders or along the perimeter of the garage.

  6. Paint the rest of the floor.

    Using a 9-inch roller attached to a pole, you can easily cover the rest of the floor. Back-roll whenever you notice any roller marks due to less epoxy. Let the first coat dry, and then do a second coat.

Leave a Comment

Your email address will not be published.