Oil Rig Workers Average Salaries of $100,000 A Year

The average salary for oil rig workers and oil field workers is $100,000 per year, but if you want to be in the higher bracket, it’s important to take note of the specific positions that may pay significantly better.

If you continue reading this article, you’ll get an understanding of what you can expect, should you consider a life at sea.

There’s no denying that it can be a very lucrative business if you choose to forego some of the advantages that are associated with doing work on land, as there is so much money to be made at sea.

In fact, many of the jobs will pay in excess of $100,000 per year simply because of the vast amount of money that is moving hands in the oil industry, making these salaries possible.

If you are fine taking some time off and working in a very remote location where you literally cannot get back to land when you want to, there is serious money to be made. In fact, there is so much money to be made that the average salary back in 2011 was $99,000 for oil rig workers. The good news is that you can even make significantly more than that if you are seeking out some of the more lucrative positions.

Additionally, you’ll be happy to know that these jobs may pay significantly more when you are willing to do the job at sea as opposed to do it on land, and meanwhile you can get to work with exciting machinery too such as welding equipment and plasma cutters.

If the question of how much it pays to work on an oil rig is one of the things that is on your mind when you’re considering your career options, you should know that you won’t be disappointed with the salaries.

In fact, you can an average of $235,000 as a drilling consultant, whereas the average salary for a reservoir engineer is $139,000 but goes as high as $184,000. There’s no doubt that you are also sacrificing certain things when you choose this type of lifestyle, but it surely is something that may be appealing to some, both earning a bunch of money while also being able to be out at sea.

There’s no denying that the need for drilling experts has increased, and that it is also becoming increasingly technical to do these jobs, where the job may take you to exotic locations such as Brazil.

If you go on a site like Ziprecruiter, you’ll also see that the range may be relatively large, but that 4% of oil rig jobs pay between $275,000 and $300,000. A rather fair amount of money to be on the water.

Types of oil rig and field jobs

If you’re an oil rig welder, the average salaries range between $78,000 and $132,000 per year, for a job that pays significantly less onshore. While you may start out at roughly $60,000 per year, you will quickly be working your way up to the nicer income brackets.

The average salary for an oil rig worker is roughly $75,000.

The average salary for a oil rig drilling engineer is somewhere between $113,000 and $139,000, making it a lucrative way to start out your career, and perhaps transfer onshore at a later point.

The good news is also that you can in fact get very well paid entry level oil field jobs that may include things such as a field technician or a petroleum specialist coming in at the entry level, both of which may offer great bonus packages. The reported average salary for entry level oil rig workers is a staggering $57,000 per year.

Oil rig roustabouts have average annual salaries of $79,000 per year.

Are you planning on doing underwater welding? An average salary of $200,000 per year is typical for an experienced underwater oil rig welder who isn’t afraid of spending a bunch of time at sea, although they may start out at $80,000 quickly climbing up over $100,000 per year. There are even some making as much as $300,000 per year doing underwater welding.

A couple of different oil rig ship captains have reported that their average salaries are more than $200,000 per year, although the salary will likely vastly depend on which company it is that you are working for.

Don’t mind putting in a lot of hard work and doing some cleaning duties, including cleaning the rig? Offshore you will be paid handsomely for this type of work as roughneck oil rig salaries average about $52,000 per year.

Petroleum geologists make an average of $93,000 to $123,000 per year and is perhaps the highest paid type of geologist that you can find.

Crane operators on oil rigs make an average of $68,000 in salary per year.

Mud engineers on oil rigs make more than the average worker on an oil rig as their average salaries are $110,000 per year, going as high as $159,000 per year.

Portable Sawmills For Sale

Whether you’re buying an engine driven welder, a portable sawmill or a plasma cutter, there are certain things that will always remain the same. There are certain action that need to be taken so that you’re making sure that you don’t spend thousands of dollars just to end up with a piece of machinery that isn’t capable of performing the work that you’re needing it for.

When it comes to sawmills, you’ll have to go through the same thought process, researching your various options, to make sure you’re not just buying the first one that you find, but the one that will make your life easier as you’re milling the wood.

Luckily you have come to the right place, where we won’t just help you on your journey to get the right sawmill, but we’ll also be delighted to help you find a bunch of other tools and equipment such as a fuel transfer tank or a hydraulic scissor lift table. We pride ourselves on not just recommending any type of product, but rather thoroughly looking up all the various products that we talk about here at Atlantic Aspiration, and offer and recommend products that we have either tried and tested ourselves, or where we have been able to find enough reviews and information online that we are convinced it’s something that would be a great addition to your life.

There is no denying that a portable sawmill is a significant investment, one that comes with a rather large price tag, which cannot be denied, but as with any other tool that can potentially be dangerous for the user, safety is a significant measure that cannot be taken lightly.

As you’re navigating your way through the woodworking shop, you’ll quickly come to realize that there are a lot of the tools that have a lot of operational risk associated to their use. You look away for a brief moment, and you might soon find yourself regretting that action as it could easily mean that you end up with only 9 remaining fingers.

While roofing contractors may statistically be one of the most dangerous professions, there’s no denying that there is a great risk associated with cutting wood, too. The blade that was meant for cutting wood will remove a finger in a split second, why your utmost attention is necessary.

It isn’t uncommon to speak to older woodworkers that have experienced a couple of accidents themselves, and if they themselves haven’t, they ave at least likely been present in a situation where something bad happened. It’s also no surprise that these places commonly don’t manage to count very high numbers in terms of days since the last grave accident happened.

When all that’s been said, times are changing and all the tools that are being used by woodworkers are fortunately becoming more safe than they were in the past, with safeguards included to try and avoid some of the accidents of the past.

There’s no denying that it’s a dangerous business, and that the instrument that is meant for cutting wood can suddenly end up doing great harm if it accidentally gets in touch with body parts that weren’t built for such close contact.

On this page, we’ll not just walk you through some of the recommendations, but you will also be able to see all the various portable sawmills that we have for sale on this page. If you either click on the individual models, or review the reviews that are attached to a lot of them, you’ll get a good understanding of what you can expect with the piece of woodworking tool that you’re looking into buying.

You should also know that it is often our recommendation that you avoid some of the cheaper models that commonly have various serious concerns that the better built models don’t. Would you rather be willing to spend a little bit more money, which in turn means you are less likely to see an accident happen? When an accident happens, if it’s not yourself getting injured, there’s the whole trouble of potentially being sued for negligence, or at the very least dealing with insurance matters, as there’s likely significant medical costs associated with someone losing a finger.

We’re right about to jump into it. Here is the ultimate guide to buying your sawmill, whether you’re just starting out, or you’re perhaps looking to upgrade the equipment you already own.

You don’t necessarily always need to go with the most sophisticated model out there, but you also don’t want to end up in a situation where you aren’t experiencing the sort of reliability from the piece of machinery, that you were hoping you would be able to get from it. Woodworking tools are no different in that regard from any of the other tools on here.

There are a bunch of different manufacturers out there that will have their various sawmills that they advertise, but it’s not certain that you’ll be able to find clarity from looking towards those sources, as they’ll all be saying that their machinery is the piece of machinery that will complete your life. Or perhaps rather just make it a little bit more easy.

Circle mills are the pieces of machinery that was the common standard before the sawmill, and if you’ve ever had to work with those machines, you would probably agree that today’s tools offer various benefits to those older models. Those previous models weren’t just more noisy but today’s standard is also cheaper, easier to use a more quiet, all great benefits when your job may be to work with these machines for many hours every single day.

Their significant improvements in terms of ease of use also mean that you’re often in a situation where you end up becoming significantly more efficient from these new machines.

Various tools work better for various people depending on each person’s needs, and these portable sawmills are no exception to that rule. If you’re looking for an entry level piece of machinery, you may be able to save a bit of money, but you can also expect that they won’t automate the work quite as well as some of the more advanced pieces of machinery will be able to. For one, you may have to turn the logs by hand, which may not seem like a big deal if your lumber cutting needs are limited, but it might end up becoming too much of a hassle if your wood cutting needs are more serious. The advantage to this more manual piece of machinery is that it will definitely be of assistance in terms of keeping you in shape.

For an entry level machine, you will also often experience that they may feel cheaper, and that is because the materials that went into crafting this machine were chosen to cut costs slightly. While you may be fine with a slightly lower quality, you should also know that you may forego on a more stable, safer feeling cut with some of those models, where you will feel the machine shaking more as they’re cutting. You will want something that still feels sufficiently sturdy that you don’t end up afraid of using it, as that would mean it would very quickly end up being a purchase that you regretted.

Although you may be looking for an entry level sawmill, there are still things that you will likely want to make sure it’s capable of, including being able to cut 26″ logs. You will also want to ensure that it is in fact easily capable of being adjusted to the specific height you will be cutting at. Even as an entry level sawmill, there is still some overlap with a full size one. You should also be sure that the machine has a feature so it will automatically power down as you’re taking your hands off of it, which is additionally a safety measure.

Did you ever consider the fact that paint may in fact not be right for the piece of machinery that you’re buying? Well, there’s a reason why houses have to be painted ever so often, and that is because the paint will eventually start peeling, and exposing the layers underneath. The situation is no different when it comes to a sawmill, and you will really be doing yourself a favor if you choose a machine that hasn’t been painted but rather powder coated and galvanized. You may think that this isn’t all that important, but you’ll soon be experiencing that the sawmill shows signs of wear and tear if you don’t go down that route and choose to save a couple of dollars instead with a cheaper option. Especially if you’re operating in a climate that has high humidity, or where the machine may get exposed to rain, you’ll start seeing the sawmill looking sad after just years of use. With the cheaper machines, you’re also not even sure whether or not the paint that has been added to it complies with the various US regulations, assuming it’s a machine that has been imported from abroad.

Don’t skimp on this seemingly pointless thing, and you’ll be thanking us later when your machine still looks impeccable after years of helping you cut those planks. You are not talking about your mom’s spade in her vegetable garden, but rather a piece of heavy-duty machinery that will take a beating on a daily basis.

A well-designed tract and a reliable motor are also important features that will ensure you won’t soon be looking for a replacement sawmill, but that you’ll be able to use your purchase for a long time to come. With a low-grade motor, you’ll soon be finding yourself becoming quite the mechanic as there will otherwise be a range of motor issues you can likely expect. You need to be asking yourself whether you’re happier cutting wood, or whether you would rather be spending more time maintaining the various parts of the machinery instead. While a more expensive machine may cost you more, you’re not wasting as much time being unproductive and having to fix issues as you would if you’re buying the cheapest sawmill you can find.

When you’re looking at the various models, it’s important to compare apples to apples as there are some of the sawmills that may initially seem cheap, but as you’re adding up all the additional features that the manufacturer didn’t choose to include with your purchase, your final bill ends up being quite a bit bigger. The reputable sawmill manufacturers won’t go above and beyond in order to make the purchase seem better than it in fact is, as they would rather make sure that they’re upfront about what it is you’re buying, so that you become a loyal customer and perhaps an advocate for the woodcutting equipment that they’re offering. They know very well that if you end up buying one of their machines, you could also end up buying a different one, why their focus is on ensuring your happiness with your purchase.

The accessories that should be included should be ones that are able to get you started on your woodcutting adventures, but that may not necessarily mean that you’re going above and beyond with your first purchase. Some of the manufacturers will have additional features that you can add onto it at a later stage, which is a nice way of still giving you the option of getting you a reliable piece of machinery, while letting you add more advanced features when you feel you can better afford those features, too. While we want you to leave this page thinking you found the right equipment for your woodcutting needs, we also don’t want to make you feel like we’re overselling you a bunch of features that you really don’t need.

Some of the additional features that can be common to add later on could be an extra track, thereby giving you the option to mill longer pieces of wood. Before you commit to a machine, it can be a good idea to research what other accessories are offered for the specific sawmill to see if those may be options that you would want to upgrade with at a later point. If you buy a cheaper piece of machinery to start off with, without researching the additional accessories, you could just end up researching considerations when buying a portable sawmill again in a year’s time.

Reputable companies will typically sell you a sawmill as a kit to assemble, which helps keep it slightly cheaper to send the machine off, but it also means you’ll gain a great deal of information about how the machine works as you’re putting it together. Just because you might end up putting it together yourself, doesn’t necessarily mean that it has to be a big tedious task, and can be something fun if you perhaps crack open a beer and put on some good music!

Best Hydraulic Scissor Lift Tables For Sale

A lot of different situations call for the inclusion of a table that simply has lifting capacities significantly more powerful than that of of your usual, electrically operated table.

That is when the hydraulic scissor lift tables come into play with their impressive functionality, providing a lot of functionality that other options may not have. On this page, we’re listing all the different options we have for sale, but we also list a bunch of other things to think about when you’re in the market to purchase one of these products.

The same way that you are able to get other products, such as plasma cutters for example, that come in a range of different grades, ranging from budget options to high-end, so do these tables, and when that’s been said there isn’t one single option that is perfect for every single application, so it is crucial that you figure out what the right options are in your scenario, too.

That includes figuring out what features you want, and which features could have perhaps been nice to have but are in fact not ones that you will be needing. This might just be because they are a little bit more expensive than what you had imagined you would be paying for the various features.

These tables come in a range of different options, including ones that fit about every single industrial purpose that you could imagine.

Load capacity

The first thing that we would encourage you to consider is the load capacity that the table should be rated at. Being able to lift something that weighs 500 lbs is a lot different from having load lifting needs that go into the thousands of pounds. If your machine is rated for a certain amount of weight, that should also be the weight that it is used for, and while you may be tempted to go above it, we strongly recommend that you don’t. You don’t want to stand in the middle of the shop having tried to lift something that weight 2,000 lbs while the machine you were using it for was only rated to be able to lift 1,000 lbs.

When you choose to use a certain tool in a manner in which it is not rated, there is also a very high risk that you end up braking any potential warranty on the product from doing so. More so than the risk of breaking the piece of machinery, it is more important that you avoid any type of accident that could have detrimental effects on the health of the people using the piece of machinery. They come in a range of different capacities, including ones that are rated for 500, 750, 10,000, 12,000 lbs and everything in between, so there is a hydraulic scissor lift table out there for you, no matter what the capacity is that you need for your shop.

Raised height

Certain situations may call for the possibility to raise the table and its contents to a certain height making it easier to work with, and making sure that you, or the person supposed to be using the table, isn’t operating it in a position that will cause them issues when doing work for an extended period of time. The amount that the table can be raised can be the distinguishing factor between a good and a bad purchase, given how hurtful it can be to work in a wrong position.

Maximum platform

The platform and the size that it is, is an important feature that ensures that you aren’t working on an area that is uncomfortably small to work on. The maximum platform isn’t just about convenience, but it’s also about safety. Since you’ll be working on a bunch of things that are extremely heavy in their nature, you’ll be wanting to make sure that you also have the space available in order to do so comfortably. The various platforms available will range significantly in size, with some being 54″ x 84″, while others are 48″ x 120″, making them significantly longer but also a little bit more narrow.

Lifting speed

Lifting speed is perhaps not one of the most crucial features, but have you ever tried working on a computer that you simply thought was too slow to comfortably be able to get done on, what you wanted? Lifting tables are no different, and the ability to lift such heavy things off the ground obviously comes at a certain expense – that the table doesn’t raise very fast. While you’ll be able to see how long it takes for the different models to go from one setting to another, there are also companies that offer that you can upgrade the motor which in turn may allow you to lift the table ever so much faster. We don’t want you to be going insane because you don’t have a table that rises as quickly as you would like for it to do! While it may cost you a bit extra, it could also easily be one of those features that you come to love.

Don’t buy a cheap one that doesn’t have an upper travel limit switch

You will want to make sure that the model you’re buying comes with an upper travel limit switch which is an incredibly comfortable feature to have that ensures that your lifts don’t go higher than you want them. If you have figured out that the work you’re doing is best done at a height of 45″, then this feature will allow you to lock that height in as the max height that your piece of machinery won’t go past. While it may be an option on some machines, it can also save you a great deal of hassle when you’re making sure that you’re buying that one table that will last you for as long as you need it.

You can also get the feature that ensures that your table doesn’t go below a preset level, which may be nice, although the feature to fix the maximum height is likely one that you will be significantly more happy that you chose to go with.

Consider an oversized platform

If you have especially big needs that the normal platforms just aren’t able to help you with, you can buy an oversized platform that better helps you ensure that you will be able to do what you want.

Velocity fuse

Issues can arise if the hydraulic hoses are accidentally severed, and those accidents aren’t anything that you would want to live with, why one of the recommendations that we think you should be looking for is a machine that has a velocity fuse. These machines are great when hoses are accidentally severed as they will keep the lift from falling, and likely ensuring that nothing gets damaged because of a machine failure, also helping keep yourself and your employees safer.

Do you want a pit mounted unit?

If the area you are working on is tight, getting a pit mounted unit may just be the space saving measure that helps ensure a good workflow in your shop. Getting these options, and you’ll be able to have your unit sit flush with the floor when it is at its lowest setting, thereby making sure that it’s not just another obstruction in the way that you have to deal with. A pit mounted unit can be really nice for cramped spaces, and will provide a lot more functionality than simply looking for a unit that isn’t very tall when it is collapsed.

You can otherwise find units that will collapse to a 9″ height when they are as close to the floor as possible, whereas other options may be as tall as 14″. With a pit mounted unit, it can be significantly easier to place something on top of it that needs to be raised, so while it’s great for the look and workflow of the shop, it can also be a crucial feature when it comes to functionality.

The shipped weight of the unit

While it may not be as big of an issue when the unit has been installed, there’s no denying that it is easier to move some of the lighter units than it is to move the heavier ones. When you’re talking about lifting capacities, the general rule also tends to be that the units with the higher load capacities tend to be heavier, with the heavier units ranging around 2,500 lbs when shipped.

Are you going for a standard unit or not?

While standard units may be enough for most people, there are a lot of people out there also, where it simply isn’t. However, it’s important to know that there are some manufacturers that may not have non-standard units readily available, and if you are starting to customize it, you may therefore have to expect that these customizations will also mean that it will take longer for your unit to get to you. You can usually see on the specific product page how long a certain company expects it will take for a product to ship if you are wanting to make a certain amount of changes to it, including how long they believe it will take before a standard unit is able to be shipped out.

Which sort of finish do you want your unit to have?

There may be certain working conditions that aren’t great for tools that could potentially rust, so if your working environment is one where there is a lot of humidity and salt in the air, you probably want to make sure that your hydraulic lift doesn’t start looking beat up after just a couple of years of use. This is done by making sure that the finish that is aded to the unit is one that is corrosion-resistant, or that you get a unit that is made of stainless steel. There are various custom finishes that are possible, such as two-part epoxy, but you might also be able to choose from a range of different corrosion-resistant coatings on the product page.

Portability

If you are looking for something that has great portability, there’s a chance that you may not end up with a unit that is rated for 12,000 lbs because it would simply be too heavy to construct such a unit to make it truly portable. However, there are other units that will be able to offer portability, that may still be rated at upwards of 1,100 lbs, while smaller models may be rated at 550 lbs. You are still dealing with a piece of machinery that may weigh somewhere between 300 – 400 lbs, but at least it is a lot better option than having to somehow manoeuvre something that weighs 2,500 lbs. With these portable models, you’ll also usually tend to see significantly smaller maximum platform sizes, and a limitation in terms of their maximum raised height, too. However, if you have situations where it is important that it is able to be moved around, that might still be a good option.

Turntable lifts

Turntable lifts are great for those moments when you would otherwise have to go around a table in order to access the other side, as they can end up saving you a bunch of time, as well as limit just how much needs to be manually carried, and the distance. From doing so, you’re not just increasing efficiency, but likely also doing a bunch of things that will help limit the wear on your workers. For an uncluttered design, that improves the workflow, you can get these units without significantly increasing the lowered height of the unit, all while gaining a bunch of functionality as well. You can even get different capacities and diameters when it comes to the lifting, as manufacturers such as South Worth offer turntables that are either 20″ or 43″, with lifting capabilities that go as high as 4,000 lbs – perfect for those heavy duty projects!

Do you need the unit to be able to tilt?

Units that are able to tilt also come in various shapes and forms, with varying level of load capacity and various sizes when it comes to the maximum platform. With upwards of 4,000 lbs of capacity when you get one of the products from South Worth, you’ll be able to tilt about anything that you may have a need to, while still being able to raise the platform as high as 45″.

While we may not have been able to cover all the various options available for these tables in this article, at least we hope that it should give you a lot better understanding of the various options available, and hopefully give you a better basis for making sure that you are getting the table that matches the specifications needed for your shop.

Fuel Transfer Tanks For Sale

If you’re not one to think that the existing storage tank that is incorporated into your vehicle is big enough, there are fortunately other options that you can use in order to make sure you can go further without having to stop and refuel.

On this page we haven’t just listed the fuel transfer tanks that we have for sale through our platform, we will also help you understand what your options are so that you get the solution that best fits the needs that you may have, whether it comes to the shape of what you are buying, the capacity that it has built into it, or various features that you may wish to have.

The process of buying such a tank is no different from buying a plasma cutter, a wide belt sander or a wood lathe, as they all require what you initially want, then researching the market to figure out which of the options out there best match the needs that you have, followed by making a purchase decision and being happy about your final purchase.

Can you use a transfer tank for gasoline?

When you are wanting to transfer gasoline in one way or another, there are very important things that you need to know about, as the DOT has issued permits to companies that manufacture and sell these tanks, as you could imagine the potential disaster that would arise from having to clean up a bunch of leaked gas that just went everywhere.

It was a complete disaster when BP had a major oil spill, and the cleaning and wildlife loss associated with it were just detrimental.

Transfer tanks, however, can also be used for ATVs or for a generator and don’t necessarily have to be used for the bed of a truck, but can be used for so many other things as well. The term transfer tanks usually refers to the transfer of diesel but it is important that you find out what it is that you wish to transfer and that you get the product that has been certified for that specific purpose.

These tanks are different from auxiliary fuel tanks that are connected to the stock factory tank, whereas a transfer tank will need a pump in order to transfer the fuel into where it can be used by your truck.

When it comes to the pump that is being used for the purpose, you may see that there are a couple of different options that include manual and electric options, where your convenience is what determines which one it is you choose to go with.

It is important to make sure that you are only transporting liquids in the tank that it has been approved for.

12 volt electric option

While many people opt for the manual option, the 12 volt electric one is one that will do the job for you, as you won’t have to do any manual labor in order to pump the gas from one tank to another, as opposed to the manual option.

Are you feeling the manual option instead?

If you would rather use a manual option for the pump that is definitely an option as well. A hand pump is for the people that aren’t afraid of putting in a little bit of work.

What makes a fuel tank DOT approved?

In order to be DOT-approved, a special certificate needs to be issued that is usually issued up to 119 gallons in capacity, which means that you can’t simply go on some sketchy website and buy a metal container to transport fuel in.

A special commercial license needs to be issued if you are wanting to transport more than 119 gallons at a time.

How do these tanks work?

When you go somewhere to refuel, the fuel is transferred to the tank, at which point you close it off and go about your day until you need the extra fuel that you have been transporting that can now be pumped into your vehicle’s factory storage tanks.

They have additionally been pressured tested in order to ensure no leakage occurs.

Do you want a toolbox combo?

If you don’t want a separate toolbox, and you want something that someone can’t just easily steal out of the bed of your truck when you aren’t paying attention, a really good option can be the fuel transfer tanks that are toolbox combos also, that allows you to store those hings you need to have readily available without putting them inside your truck.

50 gallon

While these come in a range of different sizes, the 50 gallon option is a very popular one as it will still add a bunch of mileage to your truck without simply taking up the entire bed of your truck.

100 gallon

While obvious, the 100 gallon option can obviously transfer more gas than the 50 gallon option is capable of, but you will also find that it comes at a higher price tag and will take up more of that valuable space in the back of your truck, too.

30 or 200 gallon

On both ends of the spectrum, you can find some of the slightly less popular options that appeal to those that either have more limited needs, or those that have especially big needs. The 30 gallon option may just give you that extra capacity that you’re looking for. If your truck goes 15 mpg, that is an additional 450 miles without having to rely on stopping to refuel, whereas a 200 gallon tank could give you an extra 3,000 miles at 15 mpg, although you likely won’t just need the gas for the extra mileage.

Whether you want a bigger or a smaller tank will obviously largely depend on the purpose that you are using it for, where you may be wanting a bigger tank if you are using it as a mode of transportation of fuel to something that may require it that is otherwise located far away from other fuel sources. Again, be sure that you are buying a tank that is certified for the purpose you are wanting to use it for, and get it with the type of pump you like. Where you may be willing to do a manual pump if you simply want a small tank, chances are you will probably be needing an electric one if you are having to pump diesel out of it very frequently, and in great quantities.

What to look for when you’re buying an additional tank

When you’re getting this type of tank, you’re buying an additional luxury, or perhaps even something that you will find yourself being unable to live with very soon. You don’t want to end up in a situation where you are midway between the two points that you’re driving between, and for many people this type of product ends up being as essential as their GPS or other piece of equipment. The same way there are so many other things that you don’t want to be worried about, running out of fuel is definitely another one.

While the original manufacturer of the truck that you bought may have had one thing in mind in terms of the amount of fuel that the tank would be able to hold, this type of accessory allows you to go beyond what the initial specifications allow, by attaching this tank in the back of the truck, while still ensuring that it is properly secured to the vehicle. When you find yourself in need of additional fuel, it can then be moved from the tank into your truck’s tank.

Although some people may choose to want to have a transfer tank, others may instead find it more convenient to have an auxiliary tank. Whether you want one or another is really up to you. The advantage to a transfer tank over an auxiliary one is that you can use it for things like fueling an ATV or something else that you are bringing along, and the pump that is connected to it will give you more versatility in what you choose to use it for.

Which material should you use?

The most common materials you will find that these tanks are made out of include either steel or aluminum, with the aluminum options often being slightly more expensive than the steel counterpart. Our recommendation is that you go for one made of aluminum, although you may initially be a little reluctant to spending the additional money on it. From several sources across the internet, these tanks are reported to last significantly longer. Additionally, who can withstand that smooth metallic look that they have. There are additionally several cases of people reporting that some of the steel tanks will easily suffer from damage caused by rust.

The shapes they are available in

These tanks can come in different shapes, but perhaps the most popular option is the L-shaped tank, as these have the opportunity to provide a significant amount of fuel storage, while still giving you great option to use the truck as a normal truck. These tanks often come with baffled designs which are made in order to ensure the contents remain in the designated space, even when you are driving the truck around. If you plan on using the tank for any specific type of liquid, it is important that you make sure it has been approved for that type of liquid. These tanks are usually approved for gas and diesel, although can also commonly be approved for methanol, kerosene and aviation fuel, being the most common options.

Do you want a toolbox combo?

Sometimes you don’t simply want a tank that works as a gas tank but rather something that can provide additional storage, which may be used for things such as tools and equipment. For that purpose you may start looking for a combo toolbox and fuel transfer tank that won’t just be able to get you from one point to another, but which will also be able to provide you the tool storage that you’re looking for.

What’s the right pump to go with your new piece of machinery?

Once you have bought the tank, it is now time for you to figure out which type of pump it is that you want to use, keeping in mind that there are ones with different features that you may be seeking out. The good news is that if you buy the wrong one, or you get tired of the one that you have, you will luckily be able to change it and get another, so that you can once again extract fuel from the tank to wherever you want it to go.

If you are moving other things than fuel then you may especially be wanting to make sure that you are getting the right pump, when you may be moving certain things such as food products, for instance.

The first thing we encourage you to think about is what a suitable flow rate is for the types of purposes that you intend on using it for. A pump with a lower flow rate will naturally take longer to fill up, whereas you are more likely to get gas in places where it’s not supposed to go if the pump’s flow rate is too high. While you may be fine with having to wait slightly longer when you’re moving the gas, there is also a point at which it becomes very cumbersome having to wait.

The appropriate flow rate; measured in litres per minute; will usually depend on the type of vehicle that you’ll be using it for and the size of the tank that that vehicle is working with, where the recommended flow rate for a truck is 50 lpm, 70 lpm for a bigger tank like larger vans, and 90 lpm for buses, or other vehicles that have bigger capacity tanks.

Besides the flow rate, you will also have to think about what sort of system is used in order to get the fuel out, where your options are either manually operated, battery-operated or with a power supply. As you can imagine, if you’re using the system often and you’re moving large amounts of gas, you’ll soon be finding yourself regretting getting the manual pump.

If you’re planning on reselling the fuel that you’re bringing, rather than using it yourself, you should know that there are strict requirements that any pump that is used should be able to have its various flow rates, weight and measures approved approved, so that you can ensure that a customer is in fact getting the amount of fuel that they are paying for.

Waste Oil Heater For Sale

Waste oil heaters, or otherwise referred to as waste oil burners may just be what you are desperate need of, but although you are in the process of exploring the different models on the market, you don’t want to go with just any model – you want to find the right one, which we are going to help you do.

While we do have a bunch of the best waste oil heaters in the market listed for sale on this specific page, our intention is to give you a thorough understanding of the pros and cons before you are making up your mind and making the final call on your purchase decision.

We will also answer some of the most commonly asked questions we get for this type of product, and if you ever have other questions about these machines, do feel free to reach out to a member of our stuff. We are commonly adding more information to this article to better be able to serve our users.

Are waste oil heaters safe?

From the name, it makes sense that we often get the question as to whether or not these machines are safe to use, but you need to know that the EPA in fact regulates which fuels are considered safe to burn. The name in itself does not sound very appealing, but you should know that the different types of oil are regulated, as most types of oil have burning regulations. The good thing about these models is that they will be able to safely burn some of the off-specification types of oil, that normal furnaces can’t because they may contain too much of certain substances for normal furnaces, which could include lead, for example. You can’t simply go out into your backyard and start burning off waste oil, as it is likely to be illegal, as it could emit a bunch of dangerous toxins into the air.

Do waste oil heaters smell?

The truth is that burning off waste oil can easily smell if the smoke isn’t being properly filtered, and you can easily end up getting a fine for smell pollution if you are using one in an area where it is heavily regulated, and you aren’t adhering by the standards that are put in place.

A properly working piece of machinery shouldn’t be emitting bad smells, however.

How much oil does a waste oil heater use?

The great news is that these machines may be able to save a bunch of small machines a lot of money, as they’re especially popular among small mechanic shops, being the ones that may have a bunch of this oil readily available.

A common waste oil burner will burn about 4,000 gallons per year, which can roughly translate into $8,000 to $12,000 in savings every single year. If you do the math on it, it means that it becomes a very good purchase very quickly. No wonder they are so popular among small companies that have a lot of this raw gold readily available, not having to rely on the fuel needed for the more common furnaces.

Doing the math on how much oil you will use for your burner

After reading online, we’re sure that you have seen that the same way there are a bunch of wood lathes, plasma cutters and wide belt sanders available, there isn’t only one waste oil burner available either, and there are a bunch of things that you need to look out for when you are realizing just the type of equipment that best serves the purpose for you.

The question of how much oil a waster oil heater uses depends on a range of variables including the building size in which it is being used, the capacity of the furnace, the climate in which you are situated in, and how well you have insulated the building that you will be using it for. Each of these factors will play a role, meaning if you have a building with better insulation, you will also need to burn less oil every single year.

Additionally, you will need to find out how many hours per week, month and year you are in fact trying to keep the place warm for, which will again depend on the various factors, such as how long the shifts are, how many days per week you are planning on staying open, and how warm you want it to be when you don’t have a shift going on there.

If you have a garage with 1 to 4 bays, you are likely going to be burning around 160 gallons of oil per month, as you will be using 1.0 gallons per hour, whereas if you have a garage with 7 or more bays, you are likely burning roughly 370 gallons per month. With the bigger example, you would likely be saving an estimated $700 to $1,000 per month from using waste oil burner instead of a regular one.

If you have a bigger building, and you have ready access to this type of fuel, there are other businesses saving as much as $32,000 annually.

Thinking about this as a return on investment rather than a cost

While you may initially be intimidated by the fact that some of these machines may cost thousands of dollars, at least if you’re looking for a solution for a bigger shop, we encourage you to look at the potential savings you will be garnering from going with this option, as opposed to having a normal furnace. Reality of the matter is that you will have to heat your shop, whether you do it one way or another, and if you’re currently not using an option that uses waste oil, your heating bill could be quite significant.

Instead of thinking about a cost, think about this as an investment, and consider just how many months of saved heating you will need before you have seen the purchase of this unit be worth it, and you will have recouped the amount of money that you initially put out to get the option to save for years to come. Are you feeling ready to save a bunch of money for your business already, or would you rather keep continuing with that traditional furnace you have been using in the past?

Choosing the right waste oil burning heater for your garage

We already went through the various things to consider when it comes to choosing the right unit for your garage, which includes the number of bays, the size of the place and more.

If you are looking to have upwards of 4,000 sq ft heated, with the help of 140,000 BTU, you may want to get a model like the CE-140, which is the traditionally recommended model from Clean Energy Heating Systems when it comes to smaller shops with upwards of 4 bays, allowing you to save immediately.

Do you have upwards of 5,000 square feet and need 175,000 BTU instead, then our recommendation is that you use the CE-180, which sis great for garages with 3-6 bays, providing you not just with safe heat, but also clean heat.

Does your shop have 7,000 square feet and need something with the capacity of 245,000 BTU, then we encourage you to look into the CE-250 from the same company.

For garage needs that go up to 9,000 square feet, the CE-330 is the machine you will need that provides a lot of power, and more specifically 325,000 BTUs, allowing your garage to save a bunch of money every single month. Do not miss out on the money-saving potential of that waste oil you have.

For warehouses and commercial garages, you may have even bigger needs that could be provided by the CE-440 that allows upwards of 420,000 BTU, translating into a whole bunch of monthly savings once you get it installed rather than that traditional furnace your shop has been using.

Lanair

In our previous example, we showed you which models would be appropriate given different garage sizes, and different heating requirements from the manufacturer, Clean Energy Heating Systems. However, reality is that they’re not the only ones around, and if you start looking around, you will see that another popular manufacturer out there includes Lanair.’Their models include the MX200, MX150, MX250 and L-110.

Should you DIY?

Chances are that if you have been looking around, you may have come across people and videos that have instructed you on how you could potentially go the DIY route and build your own, and that warrants a word of caution, since you are very quickly going down a path that could not just cost you a lot of money but could also end you up in a bunch of trouble, as well as put people’s lives at risk.

While you might initially think that you are handy and could easily put together such a furnace yourself, you are opening yourself up to a world of trouble by doing it this way, including not abiding by local regulations, which could mean you end up getting fined massively as a consequence, and you may also end up voiding any potential insurance coverage you have from doing so, since you are creating a fire hazards when these things aren’t made properly.

One thing is that the burning of such oil is very likely regulated where you live, likely by the EPA if you are living in the United States, or another federal entity if you are living in a different country, but the emissions of the burner may not live up to the cleanliness requirements if you are simply building your own, and the EPA strikes down rapidly when they figure out that the emissions from your garage aren’t within the legal limits set by the governing body.

If an accident happens with a unit you built yourself, you can also be certain that the insurance company will point to some small clause in the terms that you signed when you originally got insurance for your shop that may say something like engaging in illegal activity, or not taking reasonable caution in your operations, and suddenly you’re finding yourself without valid coverage in the case of an accident. The same is very likely to be the case if you were intending on building this furnace for your residential garage, also.

If you choose to build one yourself, you will also be required to actually be able to make any spare parts yourself, whereas if you are buying one from a reputable brand, spare parts will be available when you need them, saving you a bunch of hassle, as well as avoiding a lot of unnecessary risk, and securing the safety of your shop going forward.

Debunking some of the myths that we commonly get

With their potential for cost savings, it is no surprise that these machines are loved by small businesses, garages and other companies in general, but with their name and reputation also come a bunch of myths that we keep running into. Being a relatively new invention, there are still things that people are learning about them, including a lot of misinformation that is being shared, that may have in fact been true with regards to some of the previous models, although those have been addressed with newer models.

With these myths being nothing but myths, we want to make sure that you get all the necessary information before potentially avoiding these products due to their previous reputation.

They’re dirty and hard to clean

We understand it – you want to run a professional business, so of course you are worried about the potential for bad odors in your shop that would turn away or put off potential customers. The reality of the matter is that when you are getting a quality furnace, such as the ones listed on here, they’re not hard to clean or dirty.

I can’t use them without generating my own waste oil

Although the benefit may be the biggest for businesses that actually generate this waste oil themselves, there is also potential for savings for companies that aren’t generating this type of oil themselves, as you can buy it.

They’re expensive

While it may seem like a big initial investment to put in, we hope that we have convinced you that they aren’t expensive – they may cost money, but this is money that will come back into your pocket through the savings you are getting.

Wood Lathes For Sale

Here at Atlantic Aspiration, we pride ourselves on offering our users straight to the point information when they are looking for a piece of equipment, whether you are talking about a plasma cutter or a wide belt sander.

We are well aware of the fact that there are other websites out there that also sell a bunch of these products, and we want to ensure that the transparency is what sets us apart from the rest, why you can always rely on the information we are sharing with you.

While we do want to sell wood lathes, we also want to actually ensure that you are getting the one that best fits your needs, and that we are not encouraging you buying something that is either way out of your budget, or that doesn’t match what it is that you need.

While we have listed all the wood lathes that we have for sale on this specific page, we want to teach you a little bit about what it is you need to be aware of when you are choosing the one best suited to get the job done in the situations that you require it to get the job done in.

While you may like it or not, that means that we will be walking you through a bunch of the things that you need to look out for, and we will also give you a bunch of the most popular options on the market that other users tend to gravitate towards.

We have in fact written an article that quickly covers the best mini wood lathes on the market that can help you understand what some of the most popular options out there are.

Before we get into the best wood lathes specifically for you, let’s start out by looking at what it is you should be looking out for.

What to look for

Before you can actually start figuring out what your needs are and comparing the various models on the market, you should know what it is you might potentially be looking for as each model will have slightly different pros and cons, and come in at slightly different price tags also.

It would be a shame if you spent a lot of money, just to find out that the lathe you purchased is lacking very important features to you, which would be the case no matter if you’re looking for a lathe, or you are looking for a TIG welder – the answer is always to do more research and then make your decision when you have considered all the various options.

Without further ado, here are the things you should look for.

  • Size – lathes come in different options and sizes, and as you could see from the fact that we made an article that was specifically targeting the smaller options in the market, there are mini ones and then there are bigger ones also, with your individual needs dictating whether one of them is better for you than another. If you are working on more sizable projects, you will naturally want to also choose a model that reflects that, although these will naturally also be bigger than the smaller options. The 3 different sizes you should know about are the mini, midi and full wood lathe, and if you use the filters on this page, you can choose to see all the different models we have for sale that fall into those specific sizes.
  • Portability – the same way that you may want to consider portability when you are looking for the best plasma cutter or the best engine driven welder, it may also be a consideration you want to think about when you’re buying a lathe. Will you be doing most of the wood work out of a shop, or will you require being able to move the device around at your convenience? Whereas the smaller models will obviously be more portable, they have other limitations that could be more important for you than portability. The mini lathes are obviously the most portable ones, but you won’t be able to get the same amount of power out of those machines that you may get out of a bigger one. While it will definitely make it less portable, a heavier base will make for safer and more stable operation throughout.
  • The measurement of the bed – while the more traditional models have a fixed bed, you can find the newer ones that are extendable instead, which may be something that interests you, although it may not always be ideal. For instance, if you are buying a small version, we do not encourage you to buy one with an extendable bed as it won’t be as good at handling the vibrations caused by the machines, where you will get a lot safer operability from having one with a fixed bed instead. You should also consider the ideal placement of your elbows relative to the machine as it will cause less strain on your back when the elbows are the same height as the spindle.
  • Motor – if you are looking for a lathe with good speed settings being offered, it is important you look into this prior to choosing the right model for you. When you are dealing with bigger projects, you will naturally need machines that have more variable speed options, too. Generally speaking, the smaller machines will also have fewer speed options than the bigger ones do. Before buying a machine, consider the motor options that will best suit the projects you will regularly be dealing with, and whether you will need a lot of options, or whether you are happy with something simpler.
  • Headstock – the type of headstock you will want depends on the type of projects you will be working on, where you can choose between a pivoting headstock, or you may want a standard thread.
  • Tool rest – is it important for you that you get a machine that has more than one tool rest or not? You may want to seriously consider how easy it is to switch between the locked positions with various tools, as that will play a huge role when you are actually using the machine.
  • Power switch – having the power switch in the position that is most convenient for you will ensure that you don’t grow tired of the lathe a month into owning it. It can be hugely beneficial for you to consider where you want the power switch to be so that you can easily turn off the machine when you’re using it.
  • Cost – it is clear that you don’t want to purchase the most expensive machine if you have a very limited budget, however, we do encourage you to stay realistic in what it is that your budget will be able to afford you. If you have certain very specific requirements, you may just find that those aren’t possible with the budget you are trying to stay within. We don’t want you to spend more than you are comfortable spending, but we can help you find the one that matches both your budget and your needs the best.

If you are just starting out, you may be able to get away with a more budget lathe, whereas someone with a wood shop will probably require more functionality given just how often the piece of machinery will be used. By considering your individual needs, you can find the piece of equipment that matches both your needs and your budget. While we don’t want you to get a model that is too cheap for you either, we want you to get one that meets your needs.

Jet Tools

Jet Tools is a popular manufacturer of wood lathes, and we carry a lot of their various models for sale here on our site, including the 1236, the JWL-1221vs and the JWL-1440vsk. You can also find the popular benchtop JWL-1221vs, or check out the 1642 or the JWL-1015, all of which will be able to serve customers a little bit differently, depending on whether you want something smaller, bigger or more powerful. There is not one single machine on the market that will be perfect for all types of uses.

Craftsman

Craftsman is another popular brand that our users are gravitating to, with their popular model 113, which is a beautiful and popular 12 inch option that can get most of your advanced projects done in a very easy manner.

Delta

Delta is also an important contestant when it comes to solid, quality manufacturers of wood lathes , and we definitely encourage you to check out a bunch of the models they have that include the 46-700 and the 46-715, as well as their slightly less popular but also quality machines that are the 46-450 and the 46-460. Do they want to make you get started on your wood project already? We are sure getting excited, just writing this information about these machines.

Nova

When you are buying a piece of equipment from Nova, you are not just buying something that you know will be gone tomorrow. Nova is a company that has been around since 1980 and with the decades of experience in the field, they have gotten very good at producing the types of equipment that woodworkers around the country love. If you look online, you will find a bunch of people reporting being happy with the Nova 1624 that has a comfortable slow speed at roughly 200RPM.

What is the best one to buy?

While we do want to be able to give you a simple answer to that question, reality is that there isn’t a single machine that will be able to be the best one for everyone. Among the more popular models are the Jet JWL-1440VSK and the the JET-1221VS wood lathes that seem to be able to do the trick for the vast amount of our users.

A good option for beginners

If you are a beginner, we are finding a lot of users gravitating towards the NOVA 46300 and the RIKON 70-100, which are also very popular options if you are looking around the internet.

Is wood turning difficult?

When you get started and truly get going with woodturning, it is something you might just end up falling in love with, as it can be a very rewarding feeling. As with anything else, it is still a skill that you need to practice before you get good, and we wouldn’t say that it is all too difficult if you really put your mind and heart to it, and really dig into the practice, but it’s not something that you will get good at after a couple of hours either. Like with anything else, if it was that easy to get good at, would it really be worth it?

If you are still very much a beginner and haven’t even tried out the practice yet, we may just encourage you to seek out other people in your area that have a lathe already available and see if you could get them to actually let you practice a little bit before you commit to buying one. You may either find that it is something you really love doing, or you may otherwise find that you are simply looking to do so on a very occasional basis, but it could help you figure out which of the things we previously listed, are really important for you, and what sort of budget you are comfortable with for the given purchase.

So, what is a good wood lathe machine?

From reading this far, we hope that you are realizing that there isn’t a machine that works for everyone but rather that your individual needs dictate what a good one is for you. You will probably be excited to know that we are currently working on a tool that will help you in making up your mind on which piece of equipment would work the best for you. What it will do is that it will as you a bunch of questions regarding your various preferences, including portability and budget, and we will then be able to come up with recommendations as to which machine best match with those preferences you have indicated.

sitemap

https://atlanticaspiration.com/miller-plasma-cutter-for-sale/
https://atlanticaspiration.com/plasma-cutters-with-a-built-in-compressor-for-sale/feed/
https://atlanticaspiration.com/esab-plasma-cutter-for-sale/feed/
https://atlanticaspiration.com/cnc-plasma-cutter-for-sale/
https://atlanticaspiration.com/using-an-oxy-acetylene-cutting-torch/feed/
https://atlanticaspiration.com/plasma-cutter-consumables/
https://atlanticaspiration.com/thermal-dynamics-plasma-cutters-for-sale/feed/
https://atlanticaspiration.com/gasless-mig-welding/feed/
https://atlanticaspiration.com/lincoln-torchmate-4800-cost/feed/
https://atlanticaspiration.com/hobart-plasma-cutters-for-sale/feed/
https://atlanticaspiration.com/miller-welders-for-sale/
https://atlanticaspiration.com/best-flux-core-welders/feed/
https://atlanticaspiration.com/best-mini-wood-lathes/feed/
https://atlanticaspiration.com/best-plasma-cutters/feed/
https://atlanticaspiration.com/miller-millermatic-252-for-sale/feed/
https://atlanticaspiration.com/plasma-cutters-for-sale/feed/
https://atlanticaspiration.com/cheap-plasma-cutter-for-sale/
https://atlanticaspiration.com/feed/
https://atlanticaspiration.com/hypertherm-plasma-cutter-for-sale/feed/
https://atlanticaspiration.com/hobart-airforce-12ci-plasma-cutter/feed/
https://atlanticaspiration.com/portable-plasma-cutters-for-sale/feed/
https://atlanticaspiration.com/miller-millermatic-252-for-sale/
https://atlanticaspiration.com/best-engine-driven-welders/feed/
https://atlanticaspiration.com/how-to-use-a-plasma-cutter/feed/
https://atlanticaspiration.com/pilot-arc-plasma-cutters-for-sale/
https://atlanticaspiration.com/lotos-ltp5000d-plasma-cutter/
https://atlanticaspiration.com/welding-gas/feed/
https://atlanticaspiration.com/hobart-airforce-40i-plasma-cutter/
https://atlanticaspiration.com/cnc-plasma-cutting-table-for-sale/feed/
https://atlanticaspiration.com/lincoln-plasma-cutters-for-sale/
https://atlanticaspiration.com/best-welders-for-beginners/
https://atlanticaspiration.com/lotos-plasma-cutters-for-sale/
https://atlanticaspiration.com/hobart-airforce-40i-plasma-cutter/feed/
https://atlanticaspiration.com/cpanel
https://atlanticaspiration.com/hobart-airforce-12ci-plasma-cutter/
https://atlanticaspiration.com/best-mini-metal-lathes/feed/
https://atlanticaspiration.com/tig-welding/feed/
https://atlanticaspiration.com/flux-core-welding/feed/
https://atlanticaspiration.com/best-welding-helmets/feed/
https://atlanticaspiration.com/plasma-cutters-with-a-built-in-compressor-for-sale/
https://atlanticaspiration.com/lotos-ltp5000d-plasma-cutter/feed/
https://atlanticaspiration.com/hobart-airforce-27i-plasma-cutter-for-sale/
https://atlanticaspiration.com/plasma-cutter-reviews-comparison-chart/feed/
https://atlanticaspiration.com/miller-welders-for-sale/feed/
https://atlanticaspiration.com/portable-plasma-cutters-for-sale/
https://atlanticaspiration.com/plasma-cutter-prices-exposed/
https://atlanticaspiration.com/everlast-plasma-cutters-for-sale/feed/
https://atlanticaspiration.com/plasma-cutters-the-necessary-guide/feed/
https://atlanticaspiration.com/comments/feed/
https://atlanticaspiration.com/millermatic-211-for-sale/
https://atlanticaspiration.com/mig-welders-for-sale/feed/
https://atlanticaspiration.com/welding-stainless-steel/feed/
https://atlanticaspiration.com/miller-plasma-cutter-for-sale/feed/
https://atlanticaspiration.com/lotos-plasma-cutters-for-sale/feed/
https://atlanticaspiration.com/portable-welders-for-sale/
https://atlanticaspiration.com/plasma-cutter-prices-exposed/feed/
https://atlanticaspiration.com/portable-welders-for-sale/feed/
https://atlanticaspiration.com/plasma-cutter-consumables/feed/
https://atlanticaspiration.com/plasma-cutter-manufacturers/feed/
https://atlanticaspiration.com/monarch-lathes-for-sale/feed/
https://atlanticaspiration.com/pilot-arc-plasma-cutters-for-sale/feed/
https://atlanticaspiration.com/everlast-plasma-cutters-for-sale/
https://atlanticaspiration.com/tig-welders-for-sale/feed/
https://atlanticaspiration.com/hobart-plasma-cutters-for-sale/
https://atlanticaspiration.com/plasma-cutter-reviews-comparison-chart/
https://atlanticaspiration.com/lincoln-plasma-cutters-for-sale/feed/
https://atlanticaspiration.com/cnc-plasma-cutter-for-sale/feed/
https://atlanticaspiration.com/millermatic-211-for-sale/feed/