Chicago Electric 240 Volt Inverter Plasma Cutter with Digital Display

Want to buy a plasma cutter? Good call! After all, every welder worth his salt needs one in his welder toolbox. You want a tool that not only cuts through different types of metals such as steel, aluminum, and copper, but you also want one that does so with stunning precision. 

Case in point: the Chicago Electric Welding 240 Volt Inverter Plasma Cutter with Digital Display.

Chicago Electric is a trusted brand that offers state-of-the-art technological tools across a broad range of industries. And they’re up to their old tricks with their Plasma Cutter offering.

Whether you’re a beginner, a hobbyist, or a long-time professional welder, the Chicago Electric Plasma Cutter has a lot to offer in meeting your welding needs.

For starters, this plasma cutter can help you produce quick, clean, and precise welds, among other things. (Of course, given that you know how to use a plasma cutter)

How does this tool pull it off?

Let me count the ways. Here are Chicago Electric Plasma Cutter’s specs and top features.


Flow Rate: 4.5 CFM @ 60-80 PSI

Duty Cycle: 40 amps @ 60%

Cutting Capacity: Cut rating: ⅜”; Quality Cut Rating: ½”; Severance Cut Rating: ⅝”

Minimum Cut Depth: 3/8 in. steel @ 10 IPM

Maximum Amperage Output: 15-40 amps

Open Circuit Voltage: 330V

Working pressure: 60-80 psi

Length: 14.5”

Width: 6.25”

Height: 11”

Weight: 22.60 lbs

Top Features

  • Internal air/gas regulator with pressure adjustment
  • Pilot arc striking system
  • Thermal overload protection
  • LCD digital display
  • PT-40 torch with safety guard

Easy air pressure maintenance

First off, this cutting tool is equipped with an internal air regulator with pressure adjustment. This allows the tool to maintain the air pressure at a certain level, while at the same time allowing you to adjust the cutter’s pressure with ease.

Easy setup

Starting up this plasma cutter is so easy thanks to its reliable pilot arc striking system. Just hook up the compressor and the ground cable, adjust the air pressure (preferably between 60 psi and 80 psi) until you achieve the desired frequency, press the single rocker switch to turn the machine on and you’re off to the races.

Effortless arc maintenance

Moreover, a pilot arc can also help you keep your arc steady even if you’re working with hard and thicker materials. Most of the time, that added cutting capacity spells the difference between a good product and a bad one. Of course, how effectively you’re able to control the amperage settings is a big part of that, which brings us to….

Change settings on the fly

Changing the setting is as simple as flipping the toggle switch from “set” to “cutter” and vice versa. With enough practice, changing the current to accommodate specific thicknesses will feel like second nature to you, especially if your plasma cutter has enough amperage to get the job done.

Deep, quick, and precise plasma cutting

In terms of power and capacity, this plasma has a lot going for it. Boasting a max amperage output of 15-40 amps and a duty cycle of 60% at 40 Amps, this tool can cut up to ⅝ inches of steel, whether the material you’re working on is made of steel, aluminum, cast iron, stainless steel, copper, brass, and titanium. With that amount of power and control, it’s easy even for novice welders to produce precise welds.

No more overheating

You can’t compromise your safety when you’re welding. That’s even more the case if you’re using a plasma cutter. Plasma cutters tend to overheat if you’re not careful or if the tool you’re using isn’t on par with industry standards. Beginners tend to become slow when moving the torch or tend to drag the nozzle, causing your equipment or tools to overheat.

Thankfully, Chicago Electric’s plasma cutter has a built-in thermal overload relay that protects your motor from overheating. Combined with the unit’s high-quality LCD, it’s easy to keep tabs with the machine and help you control it better. 


With its lightweight and compact design, along with its built-in carry handle, this plasma cutter is easy to lug around. You’d love this one If you’re a welder who’s always out and about.

Final Word

If you want a reasonably priced plasma cutter that has all the essentials and works flawlessly, you don’t need to look further than Chicago Electric Plasma Cutter. The pilot arc striking system, thermal overload protection system, and the LCD digital display are great additions that can only improve your welding experience. 

Leave a Reply

Your email address will not be published. Required fields are marked *