Imagine the following scenario.
You want to buy a new pair of shoes.
After hours of searching online, you finally find the much-desired model.
But there is a problem.
Unfortunately, the manufacturer has only posted the sizes for men on his website.
He did not display the appropriate measurements for women as well.
What to do in this case?
Should you give up the much sought-after pair just because of this inconvenience?
No, not at all.
We are here to give you all the information needed to choose the perfect pair. We’ll guide you through the men’s to women’s shoe size conversion chart, which includes everything from size 7 to 10.
Men’s to Women’s Shoe Size Conversion Chart
However, you should know a few things about the size conversion process.
And we will make sure that by the time you finish reading this article, you will gain all the knowledge you need.
First things first.
If you are a woman looking for a comfortable pair of shoes, what size should you choose?
Well, there is no clear answer to that question.
This choice is influenced by many variables that need to be considered.
Fortunately for many people, some manufacturers have posted a standard size men’s to women’s shoe conversion chart on their websites.
With it, you can easily convert the size of a man to a measure of a woman.
But this type of conversion chart can also have its drawbacks.
One of the many disadvantages is that this chart pattern is not an international standard.
It means that this type of chart may not be valid in all countries.
A set of variables that should be considered when you want to convert a male measurement to a female size are as follows:
You may be surprised if you only consider the length when converting from male measurements to female sizes.
Although you have optimally converted the length, the footwear may not fit well.
It would be best to consider the other variables when performing the size conversion process.
These variables are influenced by the type of manufacturer and type of model you want to purchase. Some of them are:
1. The width of the toe box is an essential factor.
The toe box should be wide enough to allow the toes to move freely.
Too little width of this toe box can cause many difficulties in walking and problems with the health of the toes.
If the toe box is not wide enough, the pinky toe may rub constantly and excessively against the inner surface of the footwear.
It can cause blisters on the finger and discomfort while walking.
2. You must take the arch into account.
A comfortable shoe should support the foot by providing an arch of the sole of a degree suitable for your needs.
When you walk, the sole undergoes a bending process.
This process of bending the surface of the sole when walking is a small one, so small that it can barely be seen with the naked eye.
But just because this bending process is small doesn’t mean it should be neglected.
To provide an optimal comfort level while walking, ideal footwear should also have a degree of bending.
The degree of bending should not be too low or too high.
It is recommended to buy a shoe whose sole has an arch with an optimal degree of bending for the needs presented by the sole of your foot.
If the arch presented by the sole does not meet the needs imposed by your foot, specific health problems may occur.
This can force the foot to step in a strange, unnatural way.
And this unnatural way of walking can cause many health problems, which can even lead to pain in the lower back.
3. You must consider the type of insole before purchase.
Comfortable footwear must contain a soft and delicate insole to provide optimal comfort while walking.
But it is vital that the insole also provides a certain level of support to the foot while walking.
The insole should be long enough to cover the sole’s entire surface, from the heel to the toes.
The insole must possess all these features to be comfortable.
An insole that has all these features will be able to provide a level of comfort and support to the foot while walking.
It will prevent the foot from getting fatigued if you walk long distances.
Also, an ideal shoe will contain a type of insole that can be easily replaced after a level of wear.
It can drastically extend the life of the footwear.
Differences between men’s & women’s shoe sizes
When it comes to the differences between men’s and women’s measurements, they can be classified into two categories:
- Differences in length.
- Differences in width.
To better understand these differences, we need to talk about every one of them.
1. Differences in shoe length from man to woman are essential.
Speaking of the US, women’s shoes are usually larger than men’s.
But the term “larger” is quite vague, to be honest.
Now you might be wondering, ” How much larger are they?”
Well, women’s sizes are usually 1.5 measures larger than men’s.
But what does that mean?
It is easier for us to take an example to understand this concept better.
Let’s take a size 6 men’s footwear as an example.
Converted to female measurements, this will be 1.5 sizes larger.
Which means it will be a size of 7.5.
So a men’s shoe measure of 6 will match a women’s size of 7.5.
2. Size differences in the width of the shoe from man to woman should not be neglected.
If we talk about the US again, the people use a letter system to classify the width.
Under this letter classification system, the smallest width is called AAAA.
After this width, the following types of measures come in ascending order:
Generally, the width of a woman’s footwear will be the size B.
And the most common width for a man’s shoe will be the measure D.
Of course, there are also larger measures than E.
Measures larger than E are represented by a number placed in front of the letter.
When it comes to converting the width of a man’s footwear to the size of a woman’s shoe, this process is easy.
For most women, it is enough to be less than half the measure of a man’s width to get the best results.
By decreasing this half-width, you can easily convert a man’s size to the measure of a woman’s footwear.
Now that we’ve covered all these differences between men’s and women’s sizes, you’re probably wondering why these differences exist.
It is because women have a body of a different constitution than men.
A man has a larger and taller body, requiring a pair of larger legs to support him while walking and standing upright.
On the other hand, women have smaller and shorter bodies than men.
Because of this, they need a pair of smaller legs to support their bodies while walking and standing.
Another question that might come to mind now might be: “could a man wear a pair of women’s shoes?”
Well, the answer is “yes.”
But things are not as simple as they seem.
Although a man could wear a pair made especially for women, this does not mean that it would be comfortable for that man.
Usually, women’s footwears are much smaller and tighter than men’s shoes.
A man who tries to wear women’s footwear may find the experience quite uncomfortable and unpleasant.
It is because women’s measures are usually larger than men’s by about 1.5 measures.
Of course, wearing shoes made especially for women could be comfortable for men with smaller and narrower legs.
They could benefit from wearing unisex models made for women, which are smaller and would fit their needs perfectly.
How to convert from men’s to women’s shoe sizes
We’ve discussed the sizes of women’s and men’s footwear and learned so much new information. It’s time to find out how you can convert them.
This can help if you are a woman who wants to buy a pair of men’s shoes and do not know what measure would suit you.
A woman who wears women’s footwear of a specific size cannot purchase a pair of men’s shoes of the same measure.
It is because men’s footwear sizes do not match a woman’s measurements.
A woman who feels very comfortable in a pair of size 7 women’s shoes would feel uncomfortable in a couple of men’s footwear of the same measure.
That is why it is essential to know how to convert sizes from male to woman.
So that you can buy a pair of men’s shoes that will fit perfectly and make you feel comfortable.
And we are here to show you all the steps you need to follow to complete this conversion process in the best possible way.
For best results, we recommend that you follow these steps:
How to convert from men’s to women’s shoe sizes
- Find the pair of men’s shoes you want to buy.
- Identify the size of this pair.
- Take the value of the measure of the respective pair and add 1.5 to that value.
- The value of the amount obtained will represent the measure of the shoe converted to a woman’s size.
To make it easier to understand, we can take an example.
Suppose the men’s footwear you want to buy has a size of 7.
You have to take this value and add 1.5 to it to get the right measure for a woman.
In our case, the appropriate size for a woman will be 8.5.
All that remains to be done is to buy the much-desired men’s shoe in the measure of 8.5 because this will be the best choice.
How to measure your feet
If you don’t know exactly how big your feet are, the best way to find out is to measure them.
To complete this process, there is a list of steps and tips that we recommend following to get the most accurate results:
1. Use a measuring tape to find out the size of your feet.
2. Measure your feet while barefoot.
If you measure them while wearing socks, the measurement may be adversely affected by the thickness of the socks. The results may be erroneous.
3. Measure your feet at the end of the day.
During the day, a person’s feet tend to swell.
This process is entirely natural.
But if you measure your legs at the beginning of the day, you may get a smaller leg size than you usually would.
That is why measuring them at the end of the day is recommended.
This way, you will get a suitable measurement and buy the right pair for your needs.
This way, you will buy a pair of shoes that will feel comfortable throughout the day, even if your feet swell.
4. When measuring the width of the foot, choose the most significant size obtained.
Maybe you have obtained a value that is not fixed and can be placed in two categories of width after measuring the length of the leg. Choose the one with a larger width.
This is recommended because a person’s legs tend to widen as he gets older.
This way, you will be able to enjoy new footwear purchased for a more extended period.
5. Leave half an inch of space in front of and behind the foot.
When measuring the length of your foot, it is recommended to leave half an inch of free space in front. Do the same behind it inside the shoe.
This is necessary to ensure a certain degree of freedom of movement for your toes.
Now that we know how to measure your feet best, we still have to determine which pair of footwear would fit your feet.
Let’s assume your feet are very wide, or their soles have a very high arch.
What to do now?
How do you know which type of shoes fit your feet?
Well, each pair can show some signs that can suggest to you if they are the ideal choice for your needs or not.
All you have to do is follow these signs, and you will find the perfect pair for you.
But what if you don’t know what these signs are?
Well, you don’t have to worry about that.
We are here to help you and show you what these signs are, so you can make the right choice and buy the best pair of footwear.
Signs which suggest that a pair of shoes is ideal for someone with wide legs
Fortunately, most manufacturers provide customers with essential information about the shoes they produce.
Usually, this information can often include details that suggest whether a pair is suitable for someone with wide legs or not.
In addition to this information distributed by the manufacturer, some details in the footwear structure may suggest the same thing.
Some of these structural details are as follows:
- The sole is lined with a material that allows the foot to be ventilated, such as mesh or perforated leather.
- The insole is made of a non-irritating material, such as latex foam.
- There is an enlarged space at the end of the shoe where the toe box is placed.
Signs suggesting that a pair of shoes is suitable for someone whose feet have a high arch
In addition to the information provided by the manufacturer, other signs of the footwear structure that you should look for are the following:
- The sole has a high arch to help your foot maintain its position during the walking process.
- The shoe has support beams that extend from one end to the other and whose role is to provide support to the foot.
- The sole is made of shock-resistant material, such as high-quality foam.
Signs which suggest that a pair of shoes is suitable for a person with narrow feet
Most manufacturers share information suggesting whether or not someone with narrow legs can wear a pair of shoes.
In addition to this information, some details in the footwear structure may suggest the same thing.
Some of these are:
- There is a narrower space at the end of the shoe where the toe box is located.
- A higher instep, which primary role is to stop your foot from sliding forward during activities such as running or walking over long distances.
- A set of narrower heels.
Here’s a bunch of questions we get when it comes to converting men’s shoe sizes to women’s, along with the necessary chart.
If you want to convert the size of men’s shoes from 7 to a size of women’s footwear, then the value you will get will be 8.5.
It is because women’s shoes are 1.5 sizes larger than the measure of men’s footwear.
One man’s shoe size 8 will match a female footwear size of 9.5.
It can be easily determined by adding the value of 1.5 to the measure of 8 men’s shoes.
A 9 for men will correspond to a size of 10.5 in the case of women’s footwear.
A size of 7 women’s shoes will correspond to a measure of 5.5 men’s footwear.
It is because women’s sizes are larger than men’s.
They are about 1.5 sizes larger than men’s.
If you convert the size of 8 women’s shoes to a size of men’s footwear, you will get a measurement of 6.5.
This value is obtained by subtracting the value of 1.5 from the size 8 of a woman’s footwear.
You can easily convert the size of 8.5 in the case of women’s shoes to a size of 7 in the case of men’s footwear.
A 9 for a pair of women’s shoes is equivalent to a size of 7.5 for a couple of men’s footwear.
To perform this conversion, you only need to subtract 1.5 from the measure of 9 for women’s shoes.
For a women’s shoe size of 10, a men’s footwear size of 8.5 is the corresponding equivalent measurement.